Three-phase Induction Motor / Hengye Intelligent Drive (Hangzhou) Co., Ltd.

Moteur asynchrone triphasé

Three-phase Induction Motor Manufacturers

JY6312P

Moteur asynchrone triphasé à courant alternatif de couple 2 NM pour rails ferroviaires Fournisseurs

JY8014R

Fournisseurs de moteurs asynchrones triphasés AC avec onduleur de tension 91A

JY9024

Fournisseurs de moteurs AC câblés équipés de condensateurs de démarrage et de marche

Three-phase asynchronous motors are the versatile and have the largest power range. It has a simple structure, low cost, reliable operation, and long service life. It can be made into a high-efficiency motor that meets EU standards. When equipped with a frequency converter, speed adjustment can be facilitated and equipment operating costs can be reduced. Using a low-voltage battery as a power source and using an inverter, a low-voltage variable frequency three-phase motor can be made. The motor can meet no-load, rated load, and climbing conditions. Three-phase asynchronous motor is a common AC motor widely used in various industrial and commercial fields. Three-phase asynchronous motors have higher efficiency and power factor than single-phase asynchronous motors and are therefore more common in large and high-power applications. Three-phase asynchronous motors generally have higher power factors, smoother operation, and lower maintenance requirements. Due to the three phases, the torque output of this motor is smoother, helping to reduce mechanical vibration and noise.

À propos

Hengye Intelligent Drive (Hangzhou) Co., Ltd.

Créé en 2004, Hengye Intelligent Drive (Hangzhou) Co., Ltd. se consacre depuis longtemps à la recherche et au développement ainsi qu'à la fabrication de moteurs AC, moteurs DC, servomoteurs, moteurs sans balais, moteurs réducteurs, qui jouissent d'une grande renommée dans les secteurs des équipements de nettoyage, des équipements médicaux, des équipements logistiques et de manutention, des commandes industrielles, des pompes à vide, etc.
En tant que fournisseur de moteurs électriques AC et société de moteurs électriques DC en Chine, Hengye se concentre sur le développement des talents et dispose d'un grand nombre d'ingénieurs R&D seniors et stables, ainsi que d'ingénieurs en processus et en qualité. Parallèlement, Hengye n'a cessé d'améliorer ses capacités d'équipement, avec des machines d'usinage ultra-précises telles qu'OKUMA, MAZAK, HASS, BROTHER, ainsi que des équipements de test de pointe dans le secteur, comme ZEISS, JENOPTIK, MITUTOYO, etc.
Tout en garantissant que la technologie et la qualité dépassent les normes du secteur, Hengye s'engage à offrir des solutions personnalisées plus professionnelles et plus efficaces afin d'aider ses clients à résoudre leurs problèmes. Fourniture en gros de moteurs électriques AC/DC. Nous coopérerons avec nos clients pour évoluer ensemble et construire un avenir brillant.

Nos atouts

Certificat d'honneur

Actualités

Quels sont les avantages des moteurs à engrenages AC ? Pour quelles industries sont-ils adaptés ?

17 juil. 2025

Dans les domaines de l'automatisation industrielle moderne, des appareils intelligents et des appareils ménagers

Qu'est-ce qui fait qu'un moteur à induction monophasé ronronne sans démarrer ?

11 juil. 2025

Un moteur à induction monophasé est un outil incontournable dans les applications résidentielles, agricoles et industrielles légères.

Hengye Intelligent Drive (Hangzhou) Co., Ltd. a participé à Interclean Amsterdam, du 14 au 17 mai 2024

12 sept. 2024

Du 14 au 17 mai 2024, Interclean Amsterdam 2024 se tiendra

Three-phase Induction Motor Industry knowledge

How to determine the power rating required for a three-phase induction motor to effectively drive a load？

Determining the power rating (in kilowatts or horsepower) required for a three-phase induction motor to effectively drive a load involves understanding the mechanical characteristics and operating conditions of the load. Here’s a general process to determine the motor power rating:

– Determine the mechanical requirements of the load being driven by the motor. This includes factors such as the type of load (e.g., fan, pump, conveyor), torque requirements, speed, and duty cycle (continuous or intermittent operation).

Calculate the torque required to drive the load using the following formula:

T=F×r Where:

T = Torque (in Newton-meters, Nm)

F = Force exerted by the load (in Newtons, N)

r = Radius or lever arm distance (in meters, m)

– Determine the desired operating speed of the load. This will depend on the specific application and process requirements.

– Once torque and speed requirements are determined, calculate the power required to drive the load using the formula:

P=T×ω/1000 Where:

P = Power (in kilowatts, kW)

T = Torque (in Newton-meters, Nm)

ω = Angular velocity (in radians per second, rad/s)

If speed is given in rotations per minute (RPM), convert it to radians per second using the formula: ω=2π×Speed (RPM)/60

– Factor in the efficiency of the motor and the application’s safety margin when determining the motor power rating. It’s common to add a safety factor (typically 10-20%) to the calculated power requirement to ensure the motor can handle peak loads and variations in operating conditions.

– Based on the calculated power requirement and safety factor, select a three-phase induction motor with a power rating that meets or exceeds the calculated value. Choose a motor with a suitable frame size and speed rating for the application.

– Refer to motor manufacturer catalogs, datasheets, or online selection tools to find 3-phase Induction motor with power ratings and performance characteristics that align with the application requirements. Pay attention to factors such as motor type, enclosure, and efficiency rating.

– Verify that the selected motor is compatible with the available power supply (voltage and frequency) and meets any regulatory requirements or standards applicable to the application.

By following these steps and accurately calculating the power requirement based on the load characteristics, you can select a three-phase induction motor with the appropriate power rating to effectively drive the load while ensuring reliable and efficient operation.

What should you do if the insulation layer of a three-phase induction motor is damaged in a large area?

If the insulation layer of a three-phase induction motor is damaged in a large area, it’s important to take immediate action to prevent electrical faults, motor damage, and safety hazards. Here’s what you should do:

– Prioritize safety by disconnecting the motor from the power supply immediately. Turn off the motor’s power source and follow lockout/tagout procedures to ensure it cannot be inadvertently energized during repair work.

– Thoroughly assess the extent of the insulation damage. Determine the size, location, and severity of the damaged area. Inspect the motor windings carefully for any signs of exposed conductors, burn marks, or insulation breakdown.

– Physically isolate the 3-phase Induction Motor from the equipment or machinery it drives to prevent accidental operation while repairs are underway. Use barriers, warning signs, or other means to restrict access to the motor.

– For large-scale insulation damage or complex repair tasks, consider consulting a qualified electrician or motor repair specialist. They have the expertise and equipment necessary to assess the damage accurately and perform repairs safely.

– Depending on the severity of the damage, repair or replacement of the insulation may be required. If the damage is extensive or affects critical areas of the windings, replacement of the motor may be necessary.

– If repairable, use appropriate insulation repair techniques and materials to patch or reinforce the damaged area. This may involve applying epoxy resin, insulation tape, or insulating sleeves to restore electrical insulation integrity.

– Ensure that any repair materials used are compatible with the motor’s insulation system and operating conditions. Follow manufacturer recommendations and guidelines for selecting and applying insulation repair materials.

– After completing the repairs, perform electrical tests such as insulation resistance testing to verify the effectiveness of the repair and ensure the motor’s electrical safety. Ensure that the insulation resistance values meet or exceed acceptable levels.

– Carefully reassemble the 3-phase Induction Motor components, ensuring proper alignment and torque specifications. Before restoring power to the motor, perform functional tests to verify proper operation and monitor for any abnormal noises, vibrations, or temperature variations.

– Implement preventive measures to minimize the risk of future insulation damage, such as regular inspections, maintenance, and environmental controls. Address any factors contributing to insulation degradation, such as excessive heat, moisture, or mechanical stress.

– Maintain detailed records of the insulation repair process, including the repair method used, materials applied, test results, and any follow-up actions taken. Documentation helps track the motor’s maintenance history and aids in troubleshooting future issues.

By following these steps and addressing large-area insulation damage promptly and effectively, you can restore the integrity of the motor’s insulation system, ensure safe operation, and prolong the motor’s service life.

Contactez nos experts et obtenez
Une consultation gratuite !

Liens

Tél :

+86-15869193920 / +86-571-86751900 / +86-571-86751988

Email :

sales04@hengyemotor.com

Adresse :

N°1, 11e rue, zone de développement économique et technique de Hangzhou, Zhejiang, Chine. (Code postal : 310018)

Fabricants et usine de moteurs électriques

French